Urgent hiring for the following positions:
KUALA LUMPUR
1. KL-02/21-035 – SP3D Administrator (Mechanical & Piping)
2. KL-12/22-080 – HVAC Engineer (Mechanical & Piping)
3. KL-07/22-045 – Senior Engineer (Process & Safety)
4. KL-07/22-050 – Engineer (Process & Safety)
5. KL-12/22-081 – Senior Procurement Executive (Supply Chain Management)
6. KL-12/22-082 – Procurement Executive (Supply Chain Management)
7. KL-07/22-048 – Senior Engineer (Instrument & Control)
8. KL-02/23-008 – Designer (Electrical & Power)
9. KL-02/23-005 – Drafter (Electrical & Power)
10. KL-02/23-004 – Assistant (Quality, Health, Safety, Security & Environment)
11. KL-02/22-017 – Technical & Safety Engineer (Process & Safety)
12. KL-02/23-013 – Engineer (Planning)
KOTA KINABALU
1. KL-02/23-012 – Designer (Mechanical & Piping)
Please visit our career portal for detailed information:
https://lnkd.in/g5QMyQns
| 1 | KL-02/21-035 | S3D Administrator (Mechanical & Piping) | Kuala Lumpur | • SETUP/RESTORE S3D DATABASE FOR PROJECT • MAINTAINING PROJECT DATABASE (INTEGRITY AND BACKUP) • WELL KNOWN ON GENERAL ADMINISTRATION TASK ON S3D APPLICATION (SETUP, CONFIGURATION, ETC.) • END USER SUPPORT (TROUBLESHOOTING ON S3D BUGS, ERROR, ANY RELATED ISSUE ON APPLICATION) • PREPARE/CUSTOMIZATION OF REPORT AND DRAWING TEMPLATE/SETUP • PREPARING DELIVERABLES SUCH AS VUE MODEL, DATABASE SET, DRAWING SET • UTILIZING AUTOMATION TOOLKIT TO HELP DESIGNER’S OPERATION • CRETE AND MAINTAINING CATALOGUE (PIPING, STRUCTURAL, EQUIPMENT, ETC.) • ABLE TO ADD COMPONENTS IN CATALOGUE AS REQUESTED BY DISCIPLINE (BULK LOADING CATALOG DATA, MODIFYING SPECIFICATION, ETC.) • CUSTOMIZING SYMBOLS .DLL AND RULES TO SUITE PROJECT REQUIREMENT (EG: USING END CUT RULE TO CUSTOM CROSS SECTION STRUCTURAL MEMBERS) | • MINIMUM DIPLOMA IN RELEVANT FIELD • MINIMUM 7 YEARS OF RELEVANT WORKING EXPERIENCE IN OIL & GAS INDUSTRY | [email protected] |
| 2 | KL-02/22-017 | SENIOR TECHNICAL & SAFETY ENGINEER (PROCESS) | Kuala Lumpur | • PROVIDE SUPPORT, ADVICE AND RECOMMENDATION TO PROJECT MANAGERS/ PROJECT DIRECTOR IN RESPECT OF THE PROCESS SAFETY AND RISK ASSESSMENT REQUIREMENTS AND PREPARE PROJECT SPECIFIC PROCESS SAFETY AND RISK MANAGEMENT PLAN OF A PARTICULAR PROJECT. • PARTICIPATE IN ALL HAZID, HAZOP AND VARIOUS PROJECT TECHNICAL REVIEWS WHICH REQUIRE PROCESS SAFETY AND RISK TECHNICAL INPUT OR ADVICE. • UNDERTAKE A WIDE VARIETY OF PROCESS SAFETY AND RISK CONSULTANCY SERVICES FOR INTERNAL PROJECTS AS WELL AS EXTERNAL CLIENTS. • MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGE FOR IMPROVEMENTS WHERE APPLICABLE. • CHECK THE ENGINEERING DELIVERABLES FOR QUALITY AND COMPLIANCE TO ALL PROCESS SAFETY REQUIREMENTS, MARKS-UP ANY COMMENT OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. • CONDUCT VARIOUS PROCESS SAFETY AND RISK ENGINEERING ANALYSIS AND PROVIDE NECESSARY TECHNICAL RECOMMENDATION RELATED TO QHSSE. • GENERATE DETAILED ENGINEERING DRAWINGS RELATED TO PROCESS SAFETY. • PERFORM PROJECT DOCUMENT, DRAWING AND REPORTS FILLING AS PER QA MANUAL. • UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. • PERFORMED SAFETY STUDIES SUCH AS DISPERSION & RADIATION ASSESSMENT, ESSA, EERA, NHHA, 2D FIRE ASSESSMENT, LOSS PREVENTION WHICH INCLUDES PREPARATION HSE BASIS OF DESIGN, FIRE FIGHTING SPECIFICATION, HAZARDOUS AREA CLASSIFICATION LAYOUT AND SCHEDULE, ESCAPE EVACUATION AND SAFETY EQUIPMENT LAYOUT, FIRE WATER DEMAND AND FOAM CAPACITY CALCULATIONS, FIREWATER DRAWINGS. • FAMILIAR WITH A RANGE OF PROPRIETARY SOFTWARE INCLUDING MICROSOFT OFFICE (WORDS, EXCEL & POWERPOINT), AUTOCAD, PIPENET, PHAST AND FRED AND FAMILIAR WITH RELEVANT INTERNATIONAL CODES AND STANDARDS INCLUDING PTS, DEP, API, ISO, NORSOK, NFPA, DNV, ABS AND OTHERS CONTROL SYSTEM NETWORK, ESTABLISHING NEW DESIGN CONCEPT. | • A RECOGNIZED DEGREE IN CHEMICAL ENGINEERING OR RELEVANT FIELD. • REGISTERED AS ENGINEER WITH BOARD OF ENGINEERS MALAYSIA. • 8 TO 10 YEARS OF WORKING EXPERIENCE AS TECHNICAL & SAFETY ENGINEER. | [email protected] |
| 3 | KL-04/22-029 | SENIOR PROCUREMENT EXECUTIVE (SUPPLY CHAIN MANAGEMENT) | Kuala Lumpur | • PROVIDE GUIDANCE TO THE TEAM FOR THE EFFICIENT AND ADEQUATE MANAGEMENT OF THE PROCUREMENT ACTIVITIES ORDERS (ORDERS PRIORITY, ORDERS ALLOCATION TO PROCUREMENT TEAM) • MANAGE, MENTOR, AND PERIODICALLY EVALUATE THE PERFORMANCE OF INDIVIDUAL PROCUREMENT TEAM, IN ACCORDANCE WITH COMPANY POLICIES AND PROCEDURES. • RESPONSIBLE FOR OPERATIONAL RELATION MANAGEMENT WITH VENDORS • RESPONSIBLE FOR SOPS IMPLEMENTATION, CONTINUOUS IMPROVEMENTS AND UPDATES • IMPLEMENT PROCESS CHANGES AND IMPROVEMENTS WITHIN PROCUREMENT TEAM • RESPONSIBLE FOR RFQ AND VENDORS SELECTION IN LINE WITH COMPANY POLICIES AND PROCEDURES • RESPONSIBLE FOR THE ACCURATE IMPLEMENTATION OF VENDORS SELECTION • RESPONSIBLE FOR THE TIMELY FILING OF DOCUMENTS NECESSARY FOR THE PROMPT PAYMENT OF SUPPLIERS • RESPONSIBLE FOR THE ADEQUATE FILING OF ALL NECESSARY DOCUMENTATION TO ENSURE EFFICIENCY IN VENDOR PAYMENTS • RESPONSIBLE OF COORDINATING WITH SUBORDINATE ON EXPEDITING OF EVERY PURCHASE ORDER AND DELIVERY BY VENDOR • RESPONSIBLE FOR PR/RFQ/CBE/PO CHECK AND QUALITY INCLUDING NEGOTIATION • RESPONSIBLE FOR TIMELY AND ACCURATE DATA INPUTS IN SYSTEM AND CONTINUOUS IMPROVEMENTS • RESPONSIBLE FOR QUALITY AND TIMELY ISSUANCE OF SHIPMENT OVERVIEWS • MONITOR THE PROMPT CONTRIBUTION AND/OR HANDLING OF ORDERS- AND SHIPMENT RELATED COMPLAINTS AND INCIDENTS, CLIENT RELATIONS AND QUALITY CONTROL TEAM AS PART OF COMPANY INCIDENT MANAGEMENT • RESPONSIBLE FOR CONTINUOUS PRODUCTS’ REGISTRATION BY VENDORS • PERFORM OTHER DUTIES SUCH AS TRANSACTIONAL PROCUREMENT ACTIVITIES, AS NEEDED AND DIRECTED BY THE HEAD OF PROJECT SERVICES | • MINIMUM BACHELOR DEGREE IN ENGINEERING, LOGISTICS, MANAGEMENT, BUSINESS, OR OTHER RELATED AREA; • AT MINIMUM TOTAL EIGHT YEARS (8) OF EXPERIENCE EXECUTING AND/OR MANAGING COMMODITY PROCUREMENTS INCLUDING AT LEAST FOUR (5) YEARS’ EXPERIENCE MANAGING ENGINEERING DESIGN AND EPCC PROJECTS PROCUREMENT IN OIL AND GAS INDUSTRY • FLUENCY IN ENGLISH; • EXPERIENCE IN INTERNATIONAL PROCUREMENT STANDARD, TRANSPORT AND LOGISTICS (INTERNATIONAL FREIGHT FORWARDING, IMPORT/EXPORT REGULATIONS INCLUDING INCOTERMS AND CUSTOM CLEARANCE PROCEDURES) IS HIGHLY DESIRED • PROVEN, SUCCESSFUL EXPERIENCE COMMUNICATING AND COLLABORATING EFFECTIVELY WITH INTERNATIONAL AND LOCAL OIL & GAS / ENERGY PRODUCTS AND VENDORS • DEMONSTRATED SUCCESS LEADING/MENTORING A TEAM TO FULFIL STATED OBJECTIVES • HIGHLY INTEGRITY, STRONG SKILLS IN CRITICAL THINKING AND ANALYSIS, VERBAL AND WRITTEN COMMUNICATIONS & INTERPERSONAL INTERACTION AND PROVEN ABILITY TO WORK BOTH INDEPENDENTLY WITH LITTLE SUPERVISION, AS WELL AS PART OF A TEAM • DEMONSTRATED FACILITY WITH MICROSOFT OFFICE SUITE APPLICATIONS, INCLUDING WORD, EXCEL, OUTLOOK, PROJECT AND POWER POINT. | [email protected] |
| 4 | KL-07/22-044 | ENGINEER ROTATING (MECHANICAL & PIPING) | Kuala Lumpur | •MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGES FOR IMPROVEMENTS WHERE APPLICABLE. •CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. •CONDUCT ENGINEERING ANALYSIS AND RECOMMEND TECHNICAL SOLUTIONS. •GENERATE DETAILED ENGINEERING DRAWINGS. •FILING OF PROJECT DOCUMENT, DRAWING AND REPORTS AS PER QA MANUAL. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • A RECOGNIZED DEGREE IN MECHANICAL ENGINEERING OR RELEVANT FIELD. • REGISTERED ENGINEERING WITH BEM (REGISTERED AS A PROFESSIONAL ENGINEER WITH BOARD OF ENGINEERS MALAYSIA BY BEM COULD BE AN ADVANTAGE). • MINIMUM 3 YEARS’ EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE i.e., PDMS, NAVISWORK, PV ELIT, CAESAR, AUTOCAD AND SP3D. | [email protected] |
| 5 | KL-07/22-045 | SENIOR ENGINEER (PROCESS) | Kuala Lumpur | •ASSIST THE PROCESS LEAD ENGINEER IN THE DAY-TO-DAY WORK PERFORMANCE •PLAN, COORDINATE AND SUPERVISE MAJOR ENGINEERING WORK AND ACTIVITIES OF THE OIL AND GAS PROJECT. •IDENTIFY AND RESOLVE ENGINEERING ISSUES WHICH ARE CRITICAL FOR PROJECT SCHEDULE AND COST. •EXECUTION OF A SIGNIFICANT DESIGN TASK WITH MINIMAL SUPERVISION •CONDUCT ENGINEERING ANALYSIS AND RECOMMEND TECHNICAL SOLUTIONS. •DEVELOP AND COORDINATE THE DEVELOPMENT OF DELIVERABLES. •CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. •MOTIVATE PROJECT TEAMS’ PERSONNEL AND TO ENCOURAGE ACROSS THE FUNCTIONS INVOLVED IN A PROJECT TO MAXIMIZE THE PRODUCTIVITY AND MORALE OF THE PROJECT. •CONDUCT TECHNICAL REVIEW OF THE PROJECT TO ENSURE COMPLIANCE TO CLIENT’S SPECIFICATION. •DEVELOP STUDIES AND DESIGN OF ALL ELECTRICAL RELATED WORK E.G. POWER GENERATION TRANSMISSION AND DISTRIBUTION SYSTEMS, COORDINATION STUDIES, ETC. •PERFORM DUTY AS LEAD ENGINEER AS AND WHEN REQUIRED. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •UNDERTAKE ANY OTHERS DUTIES AS APPROPRIATE WITH THEIR COMPETENCY, AS REQUIRED BY SUPERVISOR FROM TIME TO TIME. •INTEGRATED AND/OR CONSIDER QHSSE ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE)ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES | • A RECOGNIZED DEGREE IN CHEMICAL ENGINEERING OR RELEVANT FIELD. • REGISTERED ENGINEERING WITH BEM (REGISTERED AS A PROFESSIONAL ENGINEER WITH BOARD OF ENGINEERS MALAYSIA BY BEM COULD BE AN ADVANTAGE). • MINIMUM 7 YEARS’ EXPERIENCE IN OIL & GAS INDUSTRY. • GOOD KNOWLEDGE IN HYSYS, AUTOCAD AND MICROSOFT OFFICE. | [email protected] |
| 6 | KL-07/22-048 | SENIOR ENGINEER (INSTRUMENT) | Kuala Lumpur | •ASSIST THE INSTRUMENT LEAD ENGINEER IN THE DAY-TO-DAY WORK PERFORMANCE •PLAN, COORDINATE AND SUPERVISE MAJOR ENGINEERING WORK AND ACTIVITIES OF THE OIL AND GAS PROJECT. •IDENTIFY AND RESOLVE ENGINEERING ISSUES WHICH ARE CRITICAL FOR PROJECT SCHEDULE AND COST. •EXECUTION OF A SIGNIFICANT DESIGN TASK WITH MINIMAL SUPERVISION •CONDUCT ENGINEERING ANALYSIS AND RECOMMEND TECHNICAL SOLUTIONS. •DEVELOP AND COORDINATE THE DEVELOPMENT OF DELIVERABLES. •CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. •MOTIVATE PROJECT TEAMS’ PERSONNEL AND TO ENCOURAGE ACROSS THE FUNCTIONS INVOLVED IN A PROJECT TO MAXIMIZE THE PRODUCTIVITY AND MORALE OF THE PROJECT. •CONDUCT TECHNICAL REVIEW OF THE PROJECT TO ENSURE COMPLIANCE TO CLIENT’S SPECIFICATION. •DEVELOP STUDIES AND DESIGN OF ALL ELECTRICAL RELATED WORK E.G. POWER GENERATION TRANSMISSION AND DISTRIBUTION SYSTEMS, COORDINATION STUDIES, ETC. •PERFORM DUTY AS LEAD ENGINEER AS AND WHEN REQUIRED. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME •UNDERTAKE ANY OTHERS DUTIES AS APPROPRIATE WITH THEIR COMPETENCY, AS REQUIRED BY SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE)ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • A RECOGNIZED DEGREE IN ELECTRICAL ENGINEERING OR RELEVANT FIELD. • REGISTERED ENGINEERING WITH BEM (REGISTERED AS A PROFESSIONAL ENGINEER WITH BOARD OF ENGINEERS MALAYSIA BY BEM COULD BE AN ADVANTAGE). • MINIMUM 7 YEARS’ EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE i.e., PDMS AND INSTRUCALC. | [email protected] |
| 7 | KL-07/22-050 | ENGINEER (PROCESS) | Kuala Lumpur | •MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGE FOR IMPROVEMENTS WHERE APPLICABLE. •CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENT OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DELIVERABLES. •CONDUCT ENGINEERING ANALYSIS AND RECOMMEND TECHNICAL SOLUTIONS. •GENERATE DETAILED ENGINEERING DRAWINGS. •FILING OF PROJECT DOCUMENT, DRAWING AND REPORTS AS PER QA MANUAL. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES | • A RECOGNIZED DEGREE IN CHEMICAL ENGINEERING OR RELEVANT FIELD. • REGISTERED AS ENGINEER WITH BOARD OF ENGINEERS MALAYSIA. • MINIMUM 3 YEAR OF WORKING EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E HYSYS, AUTOCAD. | [email protected] [email protected] |
| 8 | KL-07/22-051 | ENGINEER (CIVIL & STRUCTURAL) | Kuala Lumpur | •MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGES FOR IMPROVEMENTS WHERE APPLICABLE. •CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DELIVERABLES. •CONDUCT ENGINEERING ANALYSIS AND RECOMMEND TECHNICAL SOLUTIONS. •GENERATE DETAILED ENGINEERING DESIGN, ASSOCIATED CALCULATIONS AND SPECIFICATIONS OF ALL STRUCTURAL AND CIVIL WORKS REQUIRED. •FILING OF PROJECT DOCUMENT, DRAWING AND REPORTS AS PER QA MANUAL. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES | • A RECOGNIZED DEGREE IN CIVIL AND STRUCTURAL ENGINEERING OR RELEVANT FIELD. • REGISTERED AS ENGINEER WITH BOARD OF ENGINEERS MALAYSIA • MINIMUM 3 YEAR OF WORKING EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E STAAD PRO, PIPEDATA PRO, SACS, USFOS, AND WORKSUITE HUB. | [email protected] [email protected] |
| 9 | KL-02/23-008 | DESIGNER (ELECTRICAL) | Kuala Lumpur | •PREPARE TECHNICAL DRAWINGS FROM DESIGN SKETCHES AND ENGINEERING DATA. •MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGES FOR IMPROVEMENTS WHERE APPLICABLE. •CHECK THE DETAIL DESIGN DOCUMENTS FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. •PRODUCE THE VARIOUS DISCIPLINE DELIVERABLES TO THE AGREED SCHEDULE. •APPLY RECOGNIZED OFFSHORE ENGINEERING PRACTICES APPLICABLE TO PIPING DESIGN AND TOPSIDE AND PLANT LAYOUT. •APPLY GOOD INTERPERSONAL SKILLS, LIAISING WITH MEMBERS OF OTHER DISCIPLINES AND DEPARTMENTS. •PERFORM DUTY AS LEAD DESIGNER AS AND WHEN REQUIRED. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • MINIMUM DIPLOMA IN RELEVANT FIELD. • MINIMUM 7 YEARS OF RELEVANT WORKING EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E ETAP, CHALMLITE, AUTOCAD AND PHILIPS | [email protected] |
| 10 | KL-07/22-058 | DESIGNER (INSTRUMENT) | Kuala Lumpur | •PREPARE TECHNICAL DRAWINGS FROM DESIGN SKETCHES AND ENGINEERING DATA. •MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGES FOR IMPROVEMENTS WHERE APPLICABLE. •CHECK THE DETAIL DESIGN DOCUMENTS FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. •PRODUCE THE VARIOUS DISCIPLINE DELIVERABLES TO THE AGREED SCHEDULE. •APPLY RECOGNIZED OFFSHORE ENGINEERING PRACTICES APPLICABLE TO PIPING DESIGN AND TOPSIDE AND PLANT LAYOUT. •APPLY GOOD INTERPERSONAL SKILLS, LIAISING WITH MEMBERS OF OTHER DISCIPLINES AND DEPARTMENTS. •PERFORM DUTY AS LEAD DESIGNER AS AND WHEN REQUIRED. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • MINIMUM DIPLOMA IN RELEVANT FIELD. • MINIMUM 7 YEARS OF RELEVANT WORKING EXPERIENCE IN OIL & GAS INDUSTRY. | [email protected] |
| 11 | KL-02/23-005 | DRAFTER (ELECTRICAL) | Kuala Lumpur | •PREPARE TECHNICAL DESIGN DRAWINGS. •ASSIST DESIGN COORDINATOR AND SENIOR DESIGNERS FOR ALL MATTERS RELATING TO THE PROJECT. •CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. •REPORTING DIRECT TO THE DESIGNER AND RESPONSIBLE TO THE DESIGNER RELATING TO THE PROJECT. •RESPONSIBLE TO INCORPORATE ALL MARK-UP AND COMMENTS IN DRAWINGS FROM INTERNAL OR EXTERNAL. •RESPONSIBLE TO PERFORM SELF-CHECK ON THE DRAWINGS FOR CORRECTNESS AND QUALITY, REVISION AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DRAWINGS. •RESPONSIBLE AS CARE TAKER ON ALL DRAWINGS DURING EXECUTION OF THIS JOB AND ENSURE ALL THOSE DRAWINGS, COMMENTS AND MARK-UP ARE PROPERLY FILED FOR TRACEABILITY. •ENSURE ALL DOCUMENTATION DURING THE DESIGN STAGES ARE PROPERLY FILED FOR TRACEABILITY. •FILING SYSTEM FOR DRAWING AS PER QA MANUAL. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE)ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • MINIMUM PROFESSIONAL CERTIFICATE IN ENGINEERING OR RELEVANT FIELD. • MINIMUM OF 1 YEARS OF SOLID WORKING EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E AUTOCAD. | [email protected] |
| 12 | KL-11/22-068 | SENIOR EXECUTIVE (FINANCE AND ACCOUNT) | Kuala Lumpur | • GENERAL LEDGER, ACCOUNTS PAYABLE, BANK RECON. • MONTHLY & ANNUAL FINANCIAL STATEMENT, CASH BOOK, BANKING FACILITY, ONLINE BANKING. • ACCOUNTS RECEIVABLE, ONLINE BANKING, ADMINISTRATIVE. • PROCUREMENT (DIRECT PURCHASE), SUPPLIER MANAGEMENT, ADMINISTRATIVE. • COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. • INTEGRATED AND/OR CONSIDER QHSSE ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. • RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. • RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. • RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. • RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. • SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • BACHELOR’S DEGREE IN ACCOUNTING, FINANCE OR RELATED FIELD (MBA PREFERRED) • PROFESSIONAL ACCOUNTING DESIGNATION (CA, CMA OR CPA) • MINIMUM 5 YEARS EXPERIENCE IN A SIMILAR CAPACITY • ADVANCED COMPUTER SKILLS, INCLUDING PROFICIENCY IN MS OFFICE AND FINANCIAL REPORTING SOFTWARE • EXCEPTIONAL COMMUNICATION SKILLS • RESULTS-ORIENTED, STRATEGIC THINKER AND PLANNER | [email protected] |
| 13 | KL-11/22-072 | ENGINEER (PLANNING) | Kuala Lumpur | • DEVELOP, VALIDATE AND PREPARE PROJECT PLANNING PACKAGE (I.E. METHOD FOR PROGRESS MEASUREMENT, OVERALL PROJECT SCHEDULE, WBS, CPN, BAR CHART, DELIVERABLE REGISTER, S-CURVE, PROJECT MAN POWER LOADING, MAN HOUR HISTOGRAM AND OTHERS AS REQUIRED) ARE ACCORDING TO PEQP OR CLIENTS REQUIREMENTS. • ATTEND PROJECT PROGRESS MEETING (WHENEVER REQUIRED) AND TO LIAISE WITH THE CLIENT ON THE AGREED PLANNING TARGETS FOR THE PROJECT AND PREPARE REVISED SCHEDULE AS NECESSARY. • PROVIDE SUPPORT FOR TECHNICAL BID PROPOSALS AND CLARIFICATION. • ASSIST THE PLANNING AND COST CONTROL MANAGER IN THE DAY-TO-DAY PERFORMANCE OF THE WORK. • UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. • COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. • INTEGRATE AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. • RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. • RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. • RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. • RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. • SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • MINIMUM RECOGNIZED DEGREE IN ENGINEERING. • POSSESS 5 YEARS TO 10 YEARS OF WORKING EXPERIENCE AS PLANNER IN OFFSHORE UPSTREAM PROJECT • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT PROJECT AND PRIMAVERA. | [email protected] |
| 14 | KL-11/22-073 | SECRETARY | Kuala Lumpur | • MANAGE AND HANDLE A PORTFOLIO OF COMPANIES. • PERFORM CORPORATE AND SECRETARIAL DUTIES (I.E. INCORPORATION, PREPARE BOARD RESOLUTIONS AND MINUTES, MAINTAIN CORPORATE FILES ETC.). • SETS UP MEETING FILES, SCHEDULING, AND CALENDARING MEETINGS, SETS MEETING AGENDAS, SETTING LOCATION, TIME, AND APPROPRIATE DURATION, IDENTIFYING, INVITING, AND CONFIRMING PARTICIPANTS, FACILITY ARRANGEMENTS WHERE REQUIRED. • PERFORM OTHER ADMIN OR SECRETARIAL AD-HOC DUTIES AS AND WHEN REQUIRED. | • A RECOGNIZED DEGREE IN BUSINESS ADMINISTRATION OR EQUIVALENT • MINIMUM 2 YEARS OF WORKING EXPERIENCE AS SECRETARY. • PROFICIENT IN ENGLISH AND BAHASA MALAYSIA. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE . | [email protected] |
| 15 | KL-11/22-076 | COMMISSIONING ENGINEER | Kuala Lumpur | • DEVELOP ALL PLANS, SCHEDULE AND PROCEDURES FOR THE PRE-COMMISSIONING AND COMMISSIONING OF SYSTEM/SUB SYSTEMS AND PACKAGES. • PREPARE SYSTEM BOUNDARIES/DEMARCATION AND CHECK SHEET OVERVIEW. • PROVISION OF SITE SUPERVISION FOR ONSHORE/OFFSHORE EXECUTION RELATED TO PRE-COMMISSIONING AND COMMISSIONING. • LEAD COMMISSIONING TEAM DURING THE PRE-COMMISSIONING/COMMISSIONING AND START UP PHASE. • REVIEW CONTRACTORS/VENDOR/ WORK PACK PROCEDURE, JHA PRIOR START WORK. • PARTICIPATE IN THE RELEVANT WORKSHOPS PRIOR EXECUTION i.e> RA, HAZID, MEETINGS. • PROVISION OF FUNCTIONAL TEST AND INSPECTION OF THE EQUIPMENT, MATERIAL, ETC. • COORDINATE THE FUNCITIONAL TEST AND ISPECTION OF THE EQUIPMENT, MATERIAL, ETC. • COORDINATING SITE INTERFACE WITH ALL CLIENT DURING ANY SITE EXECUTION. • SUBMIT DAY TO DAY RELEVANT PROJECT REPORTING REQUIREMENT. • PREPARE HANDOVER DOCUMENTS TO OPERATION TEAM. | • MINIMUM DEGREE IN ENGINEERING OR EQUIVALENT • AT LEAST 5 YEARS OF WORKING EXPERIENCE IN OIL AND GAS INDUSTRY • PROFICIENT IN ENGLISH AND BAHASA MALAYSIA. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE , PROJECT MANAGEMENT OR ENGINEERING SOFTWARE. | [email protected] |
| 16 | MR-12/22-078 | DESIGNER (INSTRUMENT & CONTROL) | Miri | •PREPARE TECHNICAL DRAWINGS FROM DESIGN SKETCHES AND ENGINEERING DATA. •MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGES FOR IMPROVEMENTS WHERE APPLICABLE. •CHECK THE DETAIL DESIGN DOCUMENTS FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. • PRODUCE THE VARIOUS DISCIPLINE DELIVERABLES TO THE AGREED SCHEDULE. • APPLY RECOGNIZED OFFSHORE ENGINEERING PRACTICES APPLICABLE TO PIPING DESIGN AND TOPSIDE AND PLANT LAYOUT. •APPLY GOOD INTERPERSONAL SKILLS, LIAISING WITH MEMBERS OF OTHER DISCIPLINES AND DEPARTMENTS. •PERFORM DUTY AS LEAD DESIGNER AS AND WHEN REQUIRED. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTAL FRIENDLY PRODUCTS AND SERVICES. | • MINIMUM DIPLOMA IN RELEVANT FIELD. • MINIMUM 7 YEARS OF RELEVANT WORKING EXPERIENCE IN OIL & GAS INDUSTRY. •MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E AUTOCAD. • PROFICIENT IN PDMS SOFTWARE IS AN ADDED ADVANTAGE. | [email protected] |
| 17 | MR-12/22-079 | DRAFTER (INSTRUMENT AND CONTROL) | Miri | • PREPARE TECHNICAL DESIGN DRAWINGS. • ASSIST DESIGN COORDINATOR AND SENIOR DESIGNERS FOR ALL MATTERS RELATING TO THE PROJECT. • CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENTS OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DOCUMENTS. • REPORTING DIRECT TO THE DESIGNER AND RESPONSIBLE TO THE DESIGNER RELATING TO THE PROJECT. • RESPONSIBLE TO INCORPORATE ALL MARK-UP AND COMMENTS IN DRAWINGS FROM INTERNAL OR EXTERNAL. • RESPONSIBLE TO PERFORM SELF-CHECK ON THE DRAWINGS FOR CORRECTNESS AND QUALITY, REVISION AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DRAWINGS. • RESPONSIBLE AS CARE TAKER ON ALL DRAWINGS DURING EXECUTION OF THIS JOB AND ENSURE ALL THOSE DRAWINGS, COMMENTS AND MARK-UP ARE PROPERLY FILED FOR TRACEABILITY. • ENSURE ALL DOCUMENTATION DURING THE DESIGN STAGES ARE PROPERLY FILED FOR TRACEABILITY. • FILING SYSTEM FOR DRAWING AS PER QA MANUAL. • UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. • COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. • INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE)ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. • RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. • RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. • RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. • RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • MINIMUM DIPLOMA IN RELEVANT FIELD. • MINIMUM 3 YEARS OF RELEVANT WORKING EXPERIENCE IN OIL & GAS INDUSTRY. •MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E AUTOCAD. | [email protected] |
| 18 | KL-12/22-080 | HVAC ENGINEER (MECHANICAL AND PIPING) | Kuala Lumpur | • PROVIDE TECHNICAL DESIGN PACKAGES WITHIN DEFINED SCHEDULE AND BUDGET REQUIREMENTS • EXECUTES MECHANICAL ENGINEERING HVAC DESIGNS ACCORDING TO APPLICABLE CODES AND STANDARDS • ABILITY TO MEET WITH CLIENTS, PRESENT FOR HVAC ON PROGRESS OF WORK, DESIGN OPTIONS AND 3D MODEL REVIEWS • GENERATES WORKLOAD PLANS, DESIGN ANALYSES, DRAWING PLANS, SPECIFICATIONS, HVAC LOAD/VENTILATION CALCULATIONS, PUMP CALCULATIONS, COST ESTIMATES AND ESTIMATED CONSTRUCTION SCHEDULE UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. • COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. • INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. • RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. • RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. • RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. • RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. • SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • A RECOGNIZED DEGREE IN HVAC OR ELECTRICAL/MECHANICAL ENGINEERING • REGISTERED AS ENGINEER WITH BOARD OF ENGINEERS MALAYSIA. • MINIMUM 3 YEAR OF WORKING EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E PDMS, NEVISWORK, PV ELIT, CESAR, AUTOCAD AND SP3D. | [email protected] |
| 19 | KTH-05/22-033 | ENGINEER (PROCESS) | Kerteh | •MONITOR THE EFFECTIVENESS OF THE PROJECT QUALITY SYSTEM AND RECOMMENDS CHANGE FOR IMPROVEMENTS WHERE APPLICABLE. •CHECK THE ENGINEERING DELIVERABLES FOR CORRECTNESS AND QUALITY, MARKS-UP ANY COMMENT OR REVISION ON THESE DOCUMENTS AND ENSURE THAT THE CHANGES ARE INCLUDED AND COMPLETED ON THE LATEST COPIES OF ALL AFFECTED DELIVERABLES. •CONDUCT ENGINEERING ANALYSIS AND RECOMMEND TECHNICAL SOLUTIONS. •GENERATE DETAILED ENGINEERING DRAWINGS. •FILING OF PROJECT DOCUMENT, DRAWING AND REPORTS AS PER QA MANUAL. •UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. •COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. •INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. •RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. •RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. •RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. •RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. •RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. •SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES | • A RECOGNIZED DEGREE IN CHEMICAL ENGINEERING OR RELEVANT FIELD. • REGISTERED AS ENGINEER WITH BOARD OF ENGINEERS MALAYSIA. • MINIMUM 3 YEAR OF WORKING EXPERIENCE IN OIL & GAS INDUSTRY. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E HYSYS, AUTOCAD. | [email protected] |
| 20 | KL-01/23-001 | DOCUMENT CONROLLER | KUALA LUMPUR | • ASSIST THE PROJECT MANAGEMENT TEAM TO ALL MATTERS RELATING TO THE PROJECT • ASSIST THE DOCUMENT CONTROL COORDINATOR WITH THE OVERALL MANAGEMENT OF DOCUMENT MANAGEMENT AND THE ASSOCIATED PROCESSES. • DOCUMENT MANAGEMENT INCLUDING HANDLING OF DOCUMENT, RECEIPT MONITORING, EXPEDITING AND FILING AND ENSURE THE TIMELY SUBMISSION OF DELIVERABLES TO MEET THE PLANNED SCHEDULE AND BUDGETED MAN-HOURS. • COORDINATE WITH ALL DEPARTMENTS TO ENSURE COMPLETENESS OF DOCUMENTATION AND ASSIGN CODING TO RELEVANT ACCOUNTS CODE. • DEVELOP, IMPLEMENT AND MAINTAIN DOCUMENT CONTROL PROCEDURES. • RESPONSIBLE FOR ENHANCING DOCUMENT CONTROL AND INFORMATION MANAGEMENT POLICIES. • RESPONSIBLE FOR ENSURING THE PROCESS RELATED TO DOCUMENT TRANSMITTALS, RECEIPT, STORAGE AND RETRIEVAL ARE HANDLED EFFICIENTLY AND ARE ALIGNED TO THE CORPORATE STANDARDS. • GENERAL DOCUMENT CONTROL ADMINISTRATION • REPORT TO DOCUMENT CONTROL COORDINATOR FOR ADMINISTRATION MATTER AND REPORT TO PROJECT MANAGER FOR PROJECT MATTER. • INTEGRATE AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. • COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT • INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. • RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. • RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. • RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. • RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. • SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • MINIMUM DEGREE IN ENGINEERING OR EQUIVALENT • POSSESS AT LEAST 3 YEARS OF WORKING EXPERIENCE IN • PROFICIENT IN ENGLISH AND BAHASA MALAYSIA. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND PROJECT MANAGEMENT SOFTWARE | [email protected] |
| 21 | KL-01/23-002 | PROJECT ENGINEER | Kuala Lumpur | • ASSIST THE PROJECT MANAGEMENT TEAM IN ALL MATTERS RELATING TO PROJECT. • ASSIST PROJECT MANAGEMENT TEAM IN SUPERVISING THE ENGINEERS AND PERSONNEL UNDERTAKING THE PROJECT INCLUDING SUBCONTRACTOR AND THIRD PARTY. • PLAN AND COORDINATE PROJECT MANAGEMENT ACTIVITIES AND INTERFACE ISSUES BETWEEN DISCIPLINES. • REVIEW ALL DESIGN WORK OF ENGINEERING DELIVERABLES REQUIRED FOR THE ONSHORE, OFFSHORE OIL AND GAS FACILITIES. • CONDUCT TECHNICAL REVIEW OF THE PROJECT INVOLVING ALL DISCIPLINES TO ENSURE COMPLIANCE TO CLIENT’S SPECIFICATION. • INITIATE, RECOMMEND AND EFFECT IMPROVEMENTS IN THE PROJECT PLAN IN A PRO- ACTIVE MANNER SUCH THAT QUALITY, COSTS AND TIME SCALES ARE MET. • PREPARE AND COORDINATE PROJECT REPORTING. • COORDINATE PROJECT PLANNING AND SCHEDULING. • UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIHN THEIR COMPETENCY AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. | • MINIMUM DEGREE IN ENGINEERING OR EQUIVALENT • POSSESS AT LEAST 3 YEARS OF WORKING EXPERIENCE IN PROFICIENT IN ENGLISH AND BAHASA MALAYSIA. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND PROJECT MANAGEMENT SOFTWARE | [email protected] |
| 22 | KL-01/23-003 | SENIOR ENGINEER (PROJECT MANAGEMENT) | Kuala Lumpur | • ASSIST THE PROJECT MANAGER TO ALL MATTERS RELATING TO THE PROJECT. • PREPARE AND COORDINATE PROJECT REPORTING. • COORDINATE PROJECT PLANNING AND SCHEDULING. • CONDUCT TECHNICAL REVIEW OF THE PROJECT TO ENSURE COMPLIANCE TO CLIENT’S SPECIFICATION. • INITIATE, RECOMMEND AND EFFECT IMPROVEMENTS IN THE PROJECT PLAN IN A PRO-ACTIVE MANNER SUCH THAT QUALITY, COSTS AND TIME SCALES ARE MET. • EXECUTION OF A SIGNIFICANT DESIGN TASK WITH MINIMAL SUPERVISION. • CONDUCT ENGINEERING ANALYSIS AND RECOMMEND TECHNICAL SOLUTIONS. • UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. • COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. • INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. • RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE QHSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. • RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRADC AND SIGNIFICANT ASPECTS. • RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS AND WORKS INSTRUCTIONS REQUIREMENTS. • RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. • SUPPLIERS/SUB-CONTRACTORS SHALL BE ACCOUNTABLE TO PROVIDE ADEQUATE QUALITY, SAFETY AND ENVIRONMENTALLY FRIENDLY PRODUCTS AND SERVICES. | • A RECOGNIZED ENGINEERING DEGREE IN ANY DISCIPLINE. • REGISTERED AS A PROFESSIONAL ENGINEER WITH BOARD OF ENGINEERS MALAYSIA OR INSTITUTE OF ENGINEERS MALAYSIA OR OTHER BOARD OF PROFESSIONAL ENGINEERS RECOGNIZED BY BEM OR IEM. • MINIMUM 8 YEARS’ EXPERIENCE IN PLANNING, COORDINATING AND EXECUTING OIL AND GAS PROJECTS. • MUST BE COMPUTER LITERATE AND GOOD IN MICROSOFT OFFICE AND ENGINEERING SOFTWARE I.E PRIMAVERA AND MICROSOFT PROJECT. | [email protected] |
| 23 | KL-01/23-004 | PROJECT MANAGER | Kuala Lumpur | • RESPONSIBLE TO ALL MATTERS RELATING TO THE PROJECT. • REPRESENT AND BE A FOCAL CONTACT FOR ALL COMMUNICATION BETWEEN COMPANY AND CLIENTS INCLUDING SUBCONTRACTORS AND OTHER THIRD PARTIES. • IMPLEMENT THE PROJECT IN ACCORDANCE WITH THE PROJECT PEQP AND CONTRACT REQUIREMENT • REVIEW AND AGREE WITH CLIENT ON FORMATS FOR PROJECT DOCUMENT (REPORT, SPECIFICATIONS, DATASHEETS ETC.) AND DRAWINGS AT THE ONSET OF THE PROJECT. • APPROVE AND ENDORSE ALL PROJECT DOCUMENTS AND DESIGN DELIVERABLES AND ENSURE TIMELY ISSUANCE ACCORDING TO PROJECT SCHEDULE. • MANAGE AND MONITOR PROJECT MAN HOURS/COSTS AND ALL ADMINISTRATIVE MATTERS RELATED TO THE PROJECT E.G. APPROVAL OF TIMESHEETS AND OVERTIME APPLICATIONS, PROJECT EXPENSES, PLANNING OF MANPOWER, DOCUMENT DELIVERY VIA COURIER SERVICE ETC. • PROMOTE CLOSE WORKING RELATIONSHIP BETWEEN COMPANY AND CLIENT TEAMS AND MAINTAIN EXCELLENT PUBLIC RELATION. • UNDERTAKE ANY OTHER DUTIES AS APPROPRIATE WITHIN THEIR COMPETENCY, AS REQUIRED BY THEIR SUPERVISOR FROM TIME TO TIME. • COOPERATE AND SUPPORT QHSSE ACTIVITIES CONDUCTED BY TOP MANAGEMENT AND QHSSE DEPARTMENT. • INTEGRATED AND/OR CONSIDER QUALITY, HEALTH, SAFETY, SECURITY AND ENVIRONMENTAL (QHSSE) ELEMENT IN ALL ACTIVITIES TO ENSURE COMPANY’S QHSSE OBJECTIVES AND TARGETS ARE MET. • RESPONSIBLE TO COMPLY WITH THE COMPANY AND RELEVANT CUSTOMERS/CLIENTS QHSSE POLICY. • RESPONSIBLE TO REPORTS ANY POTENTIAL HAZARDS AND SIGNIFICANT ASPECTS TO THE HSSE COMMITTEE MEMBER FOR THE NEXT COURSE OF ACTION. • RESPONSIBLE TO PARTICIPATE AND TO BE CONSULTED RELATED TO POLICY, OBJECTIVES, HIRARC AND SIGNIFICANT ASPECTS. • RESPONSIBLE TO COMPLY TO OPERATIONAL CONTROLS, PROCEDURES AND WORKS INSTRUCTIONS REQUIREMENTS. • RESPONSIBLE TO PARTICIPATE IN THE INVESTIGATION PROCESS RELATED TO ANY INCIDENTS. |
